Some customers want to pause the traffic when they find some problems on DUT. But they want to keep the counters and start traffic continuously after they have fixed the problems.
There are two ways to do that on ValkyrieManager
1. If you only have one stream you can set the Tx mode into "Suppressed", that means the stream is still working but without any packets sending. If you want to start it again, just set the mode to "Enable" again.
2. If you have more than one stream you can pause the streams via the "Stop Traffic" button.
- If you want to pause all the streams on serval ports, you can select the ports by pressing "Ctrl" on your keyboard, then right-click and select "Stop Traffic". All the streams will be paused in those ports.
- If you just want to pause some streams but not all of them, you can use the "Stop Traffic" button on the top of the interface.
Please note, if you use the "Stop Traffic" in Global Statistics, all the counters will disappear.